Welcome back. You were on step .
-
Step 1: Attach the strap to the back of the tracker
Turn the tracker over. Thread the strap through the slot on the back.
Photo needed: The back of the tracker, with the strap going through its slot -
Step 2: Hold the tracker against the collar
Place the tracker on the outside of the collar, Waggi logo facing out.
Photo needed: The tracker held against the outside of a dog collar -
Step 3: Pass the strap under the collar
Take the strap under the collar, between the collar and your dog. From the outside in, it goes tracker, collar, strap.
Photo needed: Side view of the collar with the tracker on the outside and the strap running underneath -
Step 4: Fasten the strap on the T-shaped stud
Push the stud through a hole in the strap. Pull it snug so the tracker doesn’t slide or twist.
Photo needed: The strap fastened on the T-shaped stud, the tracker held firmly on the collarThe tracker still slides or twists?
Fasten the stud through a tighter hole in the strap. If it’s already on the tightest hole, your dog’s collar may be too narrow for the strap, so contact support and we’ll help.
Frequently asked questions
What collar sizes does the strap fit?
The strap fits most standard flat collars. If yours is very narrow, wide, thick or rounded, contact support.
How do I know the fit is right?
The tracker shouldn’t slide round or twist on the collar, and you should still be able to slide two fingers under the collar. If the tracker swings to the side, fasten the strap a hole tighter first, then tighten the collar a notch. If it rubs, see Troubleshooting.
Can I put it on a harness instead?
Yes, on the back strap of most harnesses. Waggi is designed to sit on your dog’s collar, so activity readings are most accurate there.
How do I record my first walk?
Keep your phone close to your dog so the tracker connects, then go to the Walk tab and tap Walk Now. The guide “Record a walk”, under Walks, takes you through it step by step.